Afikim Afi-lite Plus Manual de Instalação descarregar pdf (Página 44)

44 Chapter 3 Mounting and Wiring P/N 9040322

Connecting

AfiMilk

Solenoids to a Plug-in Connection Box

1. Plug the Cluster Removal Solenoid cable into socket 3 of the PICB.

2. Plug the Vacuum Shutoff, Sweep Solenoid cable into socket 4 of the PICB.

Wiring Non-

AfiMilk

Solenoids to a Plug-in Connection Box

Wire a non-AfiMilk Cluster Removal Solenoid or non-AfiMilk Vacuum Shut-off

Sweep Solenoid, as follows:

1. Cut off the solenoid connection cable’s yellow wire.

2. Wire the blue and brown wires to the solenoid (Table 8).

3. Plug the connector of the solenoid connection cable into the PICB as follows:

a. Plug the cable from the Cluster Removal Solenoid into socket 3.

b. Plug the cable from the Vacuum Shut-off Sweep Solenoid into socket 4.

Table 8: Wiring a Non-AfiMilk Solenoid

Color of Wire on

Connection Cable

(P/N 4097327)

Function of Wire

DC Cluster Removal

Solenoid

Vacuum Shut-Off, Sweep

Solenoid

Blue

DC Removal Output

Vacuum Shut-off, Sweep

Brown

+VBR

Yellow

None

Wiring the Pulsator

WARNING

Take appropriate precautions to prevent injury from electric shock.

Connect the pulsator as follows:

 Installations using AfiFree Connection Boxes—see Wiring the Pulsator to an

AfiFree Connection Box (below).

 Installations using PICBs—see Connecting the Pulsator to a Plug-in Connection

Box (below).

Wiring the Pulsator to an

AfiFree

Connection Box

Wire the Pulsator to the connection box according to Figure 17 (page 38).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 119 120

Comentários a estes Manuais

Sem comentários

Afikim Afi-lite Plus Manual de Instalação Página 44

Comentários a estes Manuais